3G Video Alarm with PIR & SD

3G Video Alarm with PIR & SD
1)2000K pixels digit camera
2)PIR detector
3)IR for night use
4)Video phone function
5)Support SD card Record
6)GPS function
7)Video upto QVGA(320× 240)
8)Image upto UXGA(1600× 1200)
9)16 zone wireless detectors
10)Alarm to 5 groups phone
11)Alarm to 1 group monitor center
12)Alarm to 1 group SMS center
13)Alarm to fix IP Address
14)Alarm to 2 groups Email
15)Interval time to reporting
16)Fixed time of arm and disarm
17)Built-in WCDMA/HSDPA/GSM/GPRS/EDGE
18)Built-in lithium battery

How to use it:
1)Open the battery cover, put SIM cart in it, Inserts the SD card(FAT16) into the base, put the power 5V/2A DC into the base, put down switch of the base to open power supply. The LED turns to red and last for 20, and it will start to search 3G network. After 20 seconds, the LED is flashing in orange and the alarm system begins to read the information of the SIM memory. It will enter into the status of disarm and LED is go still green. It will be turned to be green and flashing in the status of alarm when you use controller to set the base in alarm. The LED is red and flashing when the base is in alarming.
2)you can send the message to setup the base. The format: Password #operation code # content #
123456#11#1#; Set the base alarm; LED green and flashing in the base
123456#31#99998888#1#1#0#, set phone 99998888 and sent out message and picture when alarm.
123456#1#1#; Get one video clips ( about 5 second) by your mobiphone if MMS setting is ok
123456#21# CMWAP# # # 10.0.0.172#9201#
HTTP: /MMS. Monternet. COM #
Shus as MMS setting show in China( other country will be different):
Access Point Name(APN): CMWAP; Set GPRS Access point.
Username: (empty); Set MMS Uesr name.
Password: (empty); Set MMS Uesr Password.
Gateway IP (proxy) address(IP): 10.0.0.172; Set IP Address.
Port: 9201; Set Port
MMS (Relay) Server URL: HTTP: /MMS. Monternet. COM; Set MMS Homepage.
COM Function
1#-# 1#( 1-5)#; Ask video clips by your mobiphone; 1*, ' * ' stand for approves
2#-# 2#1#, open siren, 2#0#, close siren
5#-# Output 3 minutes when alarm. But can set high when 5#1#, and low when 5#0#
11#-# 11#1# (Arm); 11#0# (Disarm)*; Set the base alarm or disalarm
12#-# 12#(arm time 0000-2359)#(disarm time 0000-2359)#; Set arm time-gap or disarm time-gap
14#-# 14#(video clips 1-5)#; Sent video clips to your mobiphone when alarm, 1*
15#-# 15#1#; PIR work*; 15#0#; PIR no work; Set PIR detector work or nowork
18#-# Change password (1_6 bit). 18#(1-6)#; 123456*
19#-# 19#1#; Set Chinese version *; 19#0#; Set English version
20## Show MMS setup in the base; 20##
21#-# MMS seting: 21# APN# USER# PASS# IP# PORT# MMSHomepage#
30## show preset phone number and status in the base; 30##
(31-35)#-# (31-35)# phone number # SMS (0, 1)#MMS(0, 1)# call(0, 1)# video phone(0, 1)#; 0--disable; 1--able32#99997777#0#0#0#1#, show only dialt video phone 99997777 when alarm.
40#-# Show Email address in the base 40##
41#-# Set First Email address(0_31bit); 41#269999 @ 163. COM#
42#-# Set Second Email address(0_31bit)
50#-# Show monitoring center phone number. 50##
51#-# 51# (center phone )#(user ID)# (arm or disarm report)# (1-- report; 0-- no report)
52#-# arm or disarm report center numbers: 52# arm report number# disarm report number #
53#-# Set netware IP Address 53#( IP)# (PORT)# (user ID)#
54#-# Set SMS center number. 54# (mobiphone number) # (user ID)#
55#-# Set time interval reporting: 55# (center number 0-15bit)#( Time interval 1-99hour)# (Type 0-2)# Type: 0---send SMS; 1---send MMS; 2--- send SMS + MMS
70#-# Show wireless detector status (1-16): 70# (1-16)#